Installing The Canopy; Installing The Blades - Hunter 52594 Installation Manual

1886
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades:

Ridge
Align the three blade holes with the three blade iron posts. Squeeze
the blade and the blade iron post together.
The flared tops of the blade iron posts will be fully visible above the blade when
properly assembled.
Hanging Fan Wiring
Insert the two canopy screws
found in the
Lightly attach the blade arms to the
motor with screws found in the
hardware bag, then securely tighten
after both screws are attached.
Repeat x5
Canopy Blades
hardware bag.
bag
Blade Arm Screw
bag
Repeat x5
Light Bulbs/Glass
x2
Canopy
Screw
x10
Remote