Table of Contents
Advertisement
INSTALLATION
Door Handle assembly
You will find the bolts and screws required for the assembly of the door handles in the
refrigerator cabinet.
Fitting the refrigerator door handles
1.
Using a screwdriver set the bolts into the provided holes
on the refrigerator door. Ensure the entire bolt thread is
screwed into the hole.
2.
Remove the refrigerator handle from the packaging.
Note: there is a height difference between the
refrigerator handle and the freezer handle. See
diagrams at right.
Look for the small screw sockets along the side of the
handle and ensure that these sit towards the edge of the
door frame facing the middle opening of the refrigerator.
Hang the handle onto the set bolts on the door.
3.
Use the hexagonal key provided to set the inner socket
head cap screws into the holes on the side of the
handle. Once they are screwed all the way in, gently
shake the handle to confirm it is secured in place.
Fitting the freezer door handles
Use the same above steps to fit the freezer door handles.
However, please note that the direction of the small screw
sockets for the freezer handles are to face downward to
the ground.
Decorative cover assembly
You will find the decorative cover and required screws
within the refrigerator cabinet. Install onto the bottom beam
as shown in the diagram.
The decorative cover for the bottom beam is ornamental,
so you can choose not to install it. It will not affect the
refrigerator's performance or conditions whether you install
it or not.
The refrigerator must be disconnected from the electrical
supply before attempting installation of the decorative
cover.
7
Inner socket screw
door handle
Inner socket screw
Difference between freezer and
refrigerator door handle:
61
Freezer door handle
80
Refrigerator door handle
Screws
Decorative cover for bottom beam
Bolt
Bolt
Advertisement
Table of Contents
