Midea MFD635S User Manual page 13

OPERATING INSTRUCTIONS
Removing the lower freezer drawer
1. Slide out the lower freezer drawer.
2. Remove the two fixed screws from the partition
plate with a screw driver and take out the partition
plate.
3. Remove the rear stopper along the back edge of
the lower drawer as shown in Fig. A.
4. Take out the lower drawer body with some force
as directed by the arrows in Fig. B.
5. The installation of the lower drawer body is
conducted in the reverse order. First place the
drawer body into the lower drawer and then
reattach the rear stopper as shown in Fig. C.
Finally connect both sides of the drawer into the
positions shown by the arrows.
6.
The partition plate is installed into the
corresponding slots and screwed into place. The
position of the partition plate can be adjusted
according to your preference.
Do not remove the lower freezer drawer if not necessary.
A
B
Partition plate for the
lower drawer
Insert into
the edge
Align with
the slot
12
Rear stopper for the lower drawer
Lower drawer body
Align with the slot
Positioning hole for
the partition plate
C