Home Connect; Setting Up; Remote Start; Home Connect Settings - NEFF U2ACM7HH0B Instruction Manual

If you would like to cancel Sabbath mode, switch the
appliance off by turning the function selector to the "Off"
position.
oHome Connect
T his appliance is Wi-Fi-capable and can be remotely
H o m e C o n n e c t
controlled using a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as an oven
with no network connection and can still be operated
via the display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
Ensure that you follow the safety instructions in this
■
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the
Home Connect app.~ "Important safety
information" on page 5
Operating the appliance directly from the appliance
■
always has priority. During this time, it is not possible
to operate the appliance using the Home Connect
app.

Setting up

To set up Home Connect for your appliance, you
require the following:
Your appliance that is connected to the power
■
supply and switched on,
A smartphone or tablet with a current version of the
■
iOS or Android operating system,
And your appliance within range of your home
■
network's Wi-Fi signal.
Download the Home Connect app.
1.
Open the Home Connect app and scan the QR
2.
code.
Follow the instructions in the Home Connect app.
3.

Remote Start

To start and operate your appliance via the Home
Connect app, you must activate remote start for each
oven. If remote start is not activated, you can only view
the operating statuses in the Home Connect app and
configure your appliance's settings.
Note: If you open the appliance door 15 minutes after
remote start activation or the end of operation, remote
start is automatically deactivated.
:
Warning – Risk of fire!
Combustible objects that are left in the cooking
compartment may catch fire. Never store combustible
objects in the cooking compartment.
Activating remote start
Turn the function selector to

Home Connect settings

You can adjust Home Connect to suit your
requirements at any time.
Note: You will find the Home Connect settings in your
appliance's basic settings. Which settings the display
shows will depend on whether Home Connect has been
set up and whether the appliance is connected to your
home network.
Setting
Network connec-
•'‹‚
tion
Pairing
•'‹ƒ
(connecting to the
app)
Wi-Fi
•'‹„
* Display value (not adjustable)
** Factory setting
*** If a software update is available.
**** If the after-sales service has access.

Home Connect

.
C
Selection/display
‹ = Not connected*
‚ = Connect automatically
ƒ = Connect manually
„ = Connected*
‹ = Ready
‚ = Connect appliance
ƒ = Appliance is connected*
‹ = Switch off
‚ = Switch on
If Wi-Fi has been activated, you can
use the Home Connect functions. In
networked standby mode, the appli-
ance requires max. 2 W.
en
19