Using Caller Id; Responding To Call Waiting - Sanyo SCP-6200 Owner's Manual

Using Caller ID

Caller ID lets you know who's calling by displaying the number of the
person calling when your phone rings. If the caller's name and number
are already stored in your Internal Phone Book, the corresponding name
appears with the number. In the same way, if you call someone who has
this feature your phone number displays on their phone.
To block your phone number from being displayed for a specific
outgoing call:
Press
1.
Shift
Enter the number you want to call.
2.
Press .
3.
To permanently block your number, call Sprint PCS Customer Care.

Responding to Call Waiting

Call Waiting alerts you of incoming calls while you're on a call by
sounding beeps. The display screen informs you that a call is coming in
and shows the caller's phone number (if it's available and you are in
digital mode).
To respond to an incoming call while you're on a call:
Press (or press
This puts the first caller on hold and answers the second call.
To switch back to the first caller, press
highlight
Flash
Tip: For those calls where you don't want to be interrupted, you can
temporarily disable Call Waiting by pressing
placing your call. Call Waiting is automatically reactivated once you end
the call.
Note: You don't have to worry about being interrupted during a Sprint PCS
SM
Wireless Web call because Call Waiting and Three-Way Calling are
automatically disabled.
Section 6
46 Using Sprint PCS Service Features
.
, highlight
Flash
and press ) again.
Shift
and press ).
(or press ,
before