Setting An Alert When Roam Charges Apply (Call Guard) - Sanyo SCP-6200 Owner's Manual

Setting an Alert When Roam Charges Apply (Call Guard)

In addition to the roaming icon, Call Guard alerts you when roaming
charges apply. This feature makes it easy to manage your roaming
charges by reminding you when you make or receive roaming calls. It
also requires you to take additional steps before placing or answering a
roaming call. These additional steps are not required when you make or
receive calls while on the Sprint PCS Nationwide Network.
To Turn the Call Guard Feature On or Off:
From the Standby mode, press
1.
Highlight
2. Roaming
Highlight
3. Call Guard
Press or wait 5 seconds.
4.
Highlight or
5. On
To Place Roaming Calls With Call Guard On:
From the Standby mode, dial 1 + area code + the seven-digit
1.
number. (You can also initiate a call from the Internal Phone Book,
Call History or Sprint PCS Web Messages.)
Press (or press
2.
Press to proceed while the pop-up message is displayed.
3.
or
Press any key to erase the pop-up message, then press
highlight
Roam Call
To Answer Incoming Roaming Calls With Call Guard On:
Press (or press
1.
.)
Press to proceed while the pop-up message is displayed.
2.
OR
Press , highlight
1.
Remember if the Call Guard feature is set to
extra steps to make and receive roaming calls even if you have
selected the
Analog
Section 3
22 Understanding Roaming
to display the main menu.
and press .
and press . Then message appears.
and press .
Off
, highlight
Call
and press .
, highlight
Call Guard
and press
Answer
On
setting.
and press ).
,
and press
.
, you need to take