Sanyo SCP-6200 Owner's Manual page 25

Installing the Battery
Your Sprint PCS Phone comes with a Lithium Ion battery. Follow these
steps to install it:
Place the battery into the space beneath the antenna with the metal
1.
contacts at the bottom, facing downward.
Gently press down until it's in place and the battery release latch
2.
snaps.
Removing the Battery
To remove your battery for charging or for another reason, follow these
easy steps:
Make sure the power is off so that you don't lose any stored numbers
1.
or messages.
Press up the battery release latch and hold the battery, then pull it up
2.
and out at a 45-degree angle.
Getting to Know Your Sprint PCS Phone
Section 2
17