Folding Glass Shelf; Removing And Installing Freezer Drawers - LG GA 489 Series Owner's Manual

OPERATION
18

FOLDING GLASS SHELF

To fit tall items such as bottles in the
refrigerator compartment:
Lift the front half of the shelf
and slide it under the rear half.
From this position, it is possible to lift both
halves of the shelf and make more room.
To return the shelf to its original position,
lower both halves, then pull on the lower
half.
STEPS FOR REMOVING FOLDING SHELF
FROM THE REFRIGERATOR:
• Slightly lift the front half of the self and
slide it under the rear half.
• Take both halves of the shelf out of the
frame by lifting them up.
• Lift the shelf frame and pull.
To install the shelf in the refrigerator
compartment, follow the same steps in
reverse order.
REMOVING AND INSTALLING
FREEZER DRAWERS
• To ensure good air circulation, freezer
drawers must be pushed all the way in.
• The freezer has metal shelves, which
provides more room for food storage.
• To store large quantities of food in the
freezer, pull out the top and middle drawers
and store food on the shelves.
To remove any drawer from the freezer
compartment, follow these steps:
• Pull the drawer out;
• Lift it by its front and pull.
To install any drawer into the freezer
compartment, follow the same steps in
reverse order:
• Place the drawer on the slide rails at 45°.
• Lower the front part of the drawer to
parallel it to the slide rails.
• Push the drawer all the way in.
Try to keep it from slanting.
18