Set Apn Parameters - Quectel GL100 Manual

GL100 @Track Air Interface Protocol
+ACK:GTBEI,359231030000010,20080807100001,20090112104725,000a,0102100203

4.1.3. Set APN Parameters

Set APN parameters <apn>, <apn user name>, <apn user password> with the AT+GTSRI
command.
Example:
Configure the terminal with the command:
AT+GTSRI=gl100,0,1,cmnet,,,124.79.182.171,7001,+8613888888888,20080807100001
In the above command, "cmnet" is the APN of GPRS network, where the <apn user name> and
<apn user password> parameters are empty for the APN "cmnet". The end-user can get the APN
information from the network provider.
The configuration is done when the backend server receives the following message:
+ACK:GTSRI,359231030000010,20080807100001,20090112104725,000a,0102100203
TRACGL100AN002
- 33 -