Base Equipment Information - Quectel GL100 Manual

GL100 @Track Air Interface Protocol
<apn>: Access point name(APN).
<apn user name>: the GPRS APN user name. If the parameter field is empty, the parameter
will be cleared.
<apn user password>: the GPRS APN password. If the parameter field is empty, the
parameter will be cleared.
<main server ip>: The IP address of the primary server. It is a dotted decimal notation IP
address. Example as "192.117.16.7".
<main server port>: The port of the primary server. The valid value is 0-65535.
<main sms gateway>: Maximum 20 characters including the optional national code starting
with "+" for SMS messages. Short code (for example: 10086) is also supported.
<send time>: The UTC time when the command is sent by the backend server.
The acknowledgment message of AT+GTSRI command:
+ACK:GTSRI,
Example:
+ACK:GTSRI,359231030000010,20090101000000,20090101000002,11F0,0102100203
Parameter
unique id
send time
ack time
count num
Ver
<unique id>: The terminal's IMEI.
<send time>: The <send time> in the AT+GTSRI command.
<ack time>: The UTC time to send the message.
<count num>: The self-increasing count number will be put into every acknowledgment
message. The count is beginning from 0000 and increases by 1 every time. It will roll back
after "FFFF".
<ver>: The "HHHH" at the beginning is the hardware version. For example: 0102 means the
hardware version is GL100V0102. The "SS" in the middle is the software version. For
example: 10 means the software version is 1604B10GL100M32_SST34HF3284. The "PPPP"
at the end is the @track protocol version. For example: 0203 means the protocol version is
V2.03.

3.2.2. Base Equipment Information

The AT+GTBEI command is used to configure the base equipment information of the terminal. It
is also used to configure parameters of the secondary backend server.
AT+GTBEI=
Example:
AT+GTBEI=gl100,,,0,124.79.182.171,7003,,20090101000000
TRACGL100AN002
Length(byte) Range/format
15 IMEI
14 YYYYMMDDHHMMSS
14 YYYYMMDDHHMMSS
4 0000-FFFF
10 HHHHSSPPPP
Default
- 10 -