Advertisement
a. Handles/bar
Install the lower handle (2) on the machine and screw it with the provided screws and nuts.
-
Combine the upper handle (1) and the lower handle (2). Place the hook (3) on the right side of
the handle. Screw the handle with the two nut knobs and their screws.
b. Grass catcher
Open and hold the flap. Insert the grass catcher and attach it to the bar with the hooks.
-
The flap should fit securely.
To remove the grass catcher, remove the hooks from the bar and remove the tray.
-
c. Setting of the cutting height
According operation to be performed, adjust the
desired cutting height; Grasp the lever, pull it to the
right and then lower it to decrease the cutting
height or raise it to increase the cutting height
d. Lateral discharge
Push the lock of the flap to lift it up.
8
Advertisement
