Table of Contents
Advertisement
Registration and deregistration
Add and register handsets
If registration fails, the system will automatically try to register
again. If registration fails after the third try, Registration failed
appears on the handset screen. The handset shows To register
HS... and ...see manual alternately, and the telephone base returns
to idle mode. This may take up to five minutes to occur. Please
start again from Step 1.
Notes:
You cannot register a handset if any other system handset is in use.
f
If you try to register more than five handsets to the telephone base, the telephone base shows
f
Registration slots are full and sounds two beeps.
If it is the first time you install your AT&T
DAL75111/DAL75121/DAL75211/DAL75221/
DAL75311/DAL75321/DAL75411/DAL75421/
GL2113-1/GL2113-2/GL2113-3/GL2113-4/
GL2113-11/GL2113-21/GL2113-31/
GL2113-41 telephone system, or power returns
following a power outage, the handset and the
telephone base will prompt you to set the date
and time when registration is successful.
After that, the handset will prompt if you want
to set up Smart call blocker* and the answering
system via voice guides. Press
on the handset to start. For details, see the
corresponding sections in the telephone system's
user's manual. To skip these settings, press
/CANCEL
OFF
* Includes licenced Qaltel
Qaltel
is a trademark of Truecall Group Limited.
TM
on the handset.
technology.
TM
/SELECT
MENU
14
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO
Advertisement
Table of Contents
