Table of Contents
Advertisement
3.1 - Metal antigrease filters
1 - Cleaning
It is necessary to wash these filters at least
every two months with a normal detergent;
their compact size enables them to be
washed also in dishwasher.
2 - Replacement
Remove the metal grease filter by removing
the filter retaining clips (fig. 29).
3.2 - Activated carbon filters
1 - How they work
The activated carbon filter can hold odours until
it reaches total saturation. It is not washable
nor can it be re-used, but should be changed
at least every 4 months or more often in case
of intensive use.
2 - Replacement
Remove the antigrease filters and the activated
carbon filter from its seat by acting on the
hooks G1 (fig. 30). Fit the new activated
carbon filter and the metal antigrease filters.
WARNING: Maintenance or replacement
periods should be respected to avoid any
fire hazards when the filters get saturated
with grease.
3.3 - Light
1 - It consists of 2 20 W-halogen spotlights.
2 - Replacement (fig. 31)
Remove the two screws that lock the metal ring, take the spotlight out of its holder by
pulling slightly. When replacing, make sure that both pins are well inserted in the
holder seat.
3.4 - Cleaning
Normal cleaning operation of the hood:
- Do not use any wet cloth or sponge or water-jet.
- Do not use diluents or alcohol, as they could make the painted surfaces opaque.
- Do not use abrasive products, especially on stainless steel surfaces.
We recommend the use of a damp cloth and any neutral liquid detergent.
Part 2 - USE AND MAINTENANCE INSTRUCTIONS
29
30
G1
G1
31
S36_29
S36_30
S36_31
21
Advertisement
Table of Contents
