Page 3
OPERATION: A. REGULAR TRANSMITTER OPERATION: Transmitter System Function Remark Button Lock Doors & Arm System Arm and Delete The 2 Stage Shock Sensor Press twice within 5 seconds. Car locator Upon Armed Panic function Press and Hold for 3 seconds (3-second) Unlock Doors &...
Page 4
H. PASSIVE ARMING Active arming / disarming is controlling your security system via the remote transmitter. This security system is equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds after the last door is closed. Operation is as follows. 1.
Page 5
4. If the button is not pressed, the alarm will automatically stop after 30 seconds. N. TRIGGER THE SYSTEM When armed, your vehicle is protected as follows: 1. Light impacts will trigger the warn-away signal. A [3] long chirp from siren/horn. 2.
Page 6
REMOTE START OPERATION: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3.
Page 7
-- Engine continues running until the pre-programmed time elapsed. -- F. TIMER START: This unit can be programmed to start and run the engine every 3 (2) hours. The engine will run for the programmed run time and then shut down. IMPORTANT: Timer Start should be used only in open areas, never start and run the vehicle in on enclosed space as a garage or carport.
Need help?
Do you have a question about the MEGALARM MEGA 3400 and is the answer not in the manual?
Questions and answers