Play Music - SanDisk Sansa m230 User Manual

Control
For more information about the onscreen menus, see the Navigating the Software Menus in
the user guide on Page 25.

Play Music

To play music files, you need to transfer music to your player.
Transfer Music
The first step to playing music is to transfer files to your player. Follow these steps:
1. Use the USB connector cable provided with your player to connect the USB port on
your player to an open USB port on your computer. The player will appear as a
removable drive in Windows File Explorer. (Can't find the USB port on your player?
See The Basic Controls section on page 3.)
2. Drag and drop music files to the player from any location on your hard-drive or use a
variety of music software to move music to your Sansa. For more information on how
to use specific software, please refer to the help files provided with each program.
NOTE: Because your Sansa Player automatically organizes your music by artist, album,
song title, genre, and year, you only need to copy your music to the player. Your Sansa
will automatically create a music library which you can later sort with easy-to-use menus.
Play Music Files
After you have transferred music files to your player, disconnect the USB cable from your
player and follow these steps:
1. Press the Power/Menu Button once. The SanDisk logo and Sansa logo will briefly
appear onscreen then disappear. (Can't find the Power/Menu Button? See The
Basic Controls section on Page 3.)
WARNING: If the onscreen message says "Locked" and then shuts off, you
need to locate the Hold Button on the left side of your player. Slide that button
up to unlock your device. Then repeat Step 1 above. See The Basic Controls
section on Page 3 if you cannot find the Hold Button.
Name
Mic
Function(s)
Located on the left side of the player, speak into the
Mic during Recording.
5
Quick Start