Adjusting Settings - SanDisk Sansa m230 User Manual

confirm, press the Select button when the check box is highlighted. To cancel, press the |<<
button to highlight X button and the Select button.

Adjusting Settings

Your player allows you to define the equalizer and repeat settings for music.
Set Equalizer Playback
The sound settings on your Sansa can be optimized for different music styles using the
onboard five-band equalizer. Follow these steps:
1. Put your player in Play Music mode. See Using the Music Controls on Page 10 if
you need help with this step.
2. Briefly press the Power/Menu Button. The software Menu will appear onscreen.
See The Basic Controls section on Page 3 if you cannot find the Power/Menu
Button.
3. Press the Repeat/AB/Down Button to scroll to the Settings item. Press the Select
Button to select Settings.
4. Press the Repeat/AB/Down Button to scroll to the Equalizer item. Press the Select
Button to select Equalizer.
5. Press the Select Button to select the Equalizer. Your unit is preset to Custom.
Press Select to change the equalizer setting manually, or to save time press the
Repeat/AB/Down Button for preset equalizer levels. Press the Play/Pause/Up
Button to scroll through the Pop, Classical, Jazz and Rock equalizer settings. If you
are playing a song when you change settings, your music will change to the
equalizer setting that is highlighted. Press the Select Button to select the equalizer
setting you want.
6. The Custom equalizer configuration screen will appear as a set of five vertical
rectangles that represent five equalizer bands you can define. Press the Next/Fast
Forward Button to move from rectangle to rectangle, from left to right. Press down
the Play/Pause/Up Button or Repeat/AB/Down Button to increase or decrease the
setting for each equalizer band.
7. When you have set the equalizer bands, press the Select Button twice to save and
exit back into the menu.
8. All music played will use these settings until you change to another equalizer
setting.
14
Playing Music