Battery Installation; Battery Indicator; Connecting To The Computer; Transfer Music To Shaker Player - SanDisk sansa Shaker SDMX9N-1024R-A18 User Manual

Battery Installation

The Sansa Shaker player is shipped with 1
non-rechargeable AAA-battery. One fresh
AAA-battery will last up to 10 hours when
listening through the earphone.
Please execute the following steps installing
new battery:
1) Twist open the Sansa Shaker
Note: Insert the Negative (-) end first.
2) Open the Bottom Cap
3) Open the battery cover
4) Insert the new battery
Note: Insert the Negative (-) end first.
5) Close the battery cover
Note: There should be a click sound when battery cover is closed properly.
™
cap at the bottom.

Battery Indicator

1) When the device is playing or idle and the battery
level is low, the 'Uh-Oh' sound will play before
the Shutdown sound can be heard, the device will
blink 5 times then shuts off.
2) It is possible to turn the device back on and can
resume playing for some time. When it reaches low
battery condition, it will turn off as described in
item #1.

Connecting to the Computer

Please execute the following steps to connect your
™
Sansa Shaker player to the computer for uploading or
downloading music files:
1) Remove the Sansa Shaker
2) Connect the small end of the USB cable to Sansa
™
Shaker player.
3) Connect the larger end to an available USB port on
the computer.
4) An additional drive letter will appear in
My Computer under Removable Storage Devices.
™
Cap at the bottom.
3