Finding A Radio Station - SanDisk Sansa m230 User Manual

Figure 4: The FM Radio LCD screen
The control buttons and ports for your player are described in The Basic Controls section on
Page 3. More detailed descriptions on how the controls work is included in the step-by-step
instructions throughout this document. In addition, the Navigating the Software Menus
chapter on Page 25 describes the onscreen menus that appear when you use these controls.

Finding a Radio Station

Once the FM Radio screen appears, you can listen to your FM radio and change settings.
Follow these steps:
1. Put your player in FM Radio mode. See Using the FM Radio Controls on Page 16
if you need help with this step.
2. To change stations, press the Next/Fast Forward Button or Previous/Fast Reverse
Button to move along the radio spectrum. Press and hold either of these buttons to
scan radio stations.
NOTE: You can scan preset stations using the Play/Pause/Up Button or the
Repeat/AB/Down Button. See Accessing FM Preset on Page 18 to learn how to access
the Preset Channel software menus to set preset and delete preset channels.
3. To change the volume of your music as it plays, push the volume button on the right
side of your player.
4. To stop playing the FM radio, you have two choices:
Press and hold down the Power/Menu Button until the "Powering Down"
message appears.
Press the Power/Menu Button briefly to navigate the software Menu to switch to
Music mode or Recorder mode. To learn how onscreen menus work, see the
Navigating the Software Menus chapter that begins on Page 25.
Listening to the FM Radio
17