Connecting To Remote 14 Receptacle Rc14 - Miller Big Blue 400 PX CE Owner's Manual

5-11.

Connecting To Remote 14 Receptacle RC14

*The remaining sockets are not used.
Notes
24 VOLTS AC
REMOTE
OUTPUT
CONTROL
OR
NEUTRAL
Ref 804 630-C
Socket* Socket Information
A 24 volts ac. Protected by sup-
plementary protector CB8.
B Contact closure to A completes
24 volt ac contactor control
circuit.
C Output to remote control:+10
volts dc in MIG mode; 0 to +10
volts dc in Stick or TIG mode.
D Remote control circuit common.
E DC input command signal: 0 to
+10 volts from min. to max. of
remote control with Voltage/
Amperage Adjust control at
max.
Current feedback: 1 volt per
F
100 amperes.
H Voltage feedback: 1 volt per 10
arc volts.
K Chassis common.
GND
G Circuit common for 24 volt ac
circuit.
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
OM-229 979 Page 29