Parkside PPSK 40 B2 Operation And Safety Notes Translation Of The Original Instructions page 32

Do not touch the electrodes with bare hands.
„
Do not wear wet or damaged gloves.
„
Protect yourself from electric shock with insulation against the
„
workpiece.
Do not open the device housing.
„
Additional protection against a shock from the mains power in
„
the event a fault can be provided by using a fault-circuit inter-
rupter, which is operated with a leakage current of no more than
30 mA and covers all mains-powered devices in close proximity.
The fault-circuit interrupter must be suitable for all types of current.
There must be means of rapid electrical isolation of the cutting
„
power source or the cutting circuit (e.g. emergency stop device)
which are easily accessible.
DANGER FROM SMOKE EMISSION WHEN PLASMA
CUTTING:
Inhalation of fumes which result from plasma cutting can endanger
„
health.
Do not keep your head in the fumes.
„
Use the device in open areas.
„
Only use the device in well-ventilated spaces.
„
DANGER FROM FLYING SPARKS WHEN PLASMA CUTTING:
Cutting sparks can cause an explosion or fire.
„
Keep flammable substances away from the cutting location.
„
Do not use the plasma cutter near flammable substances.
„
Cutting sparks can cause fires.
„
Keep a fire extinguisher close by and an observer should be
„
present to be able to use it immediately.
Do not carry out plasma cutting on drums or any other closed
„
containers.
DANGER FROM ARC BEAMS:
Arc beams can damage your eyes and injure your skin.
„
Wear a hat and safety goggles.
„
Wear hearing protection and high, closed shirt collars.
„
Use a welding safety helmet and make sure that the filter setting
„
is correct.
Wear complete body protection.
„
DANGER FROM ELECTROMAGNETIC FIELDS:
32
GB