Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung MM-ZB7 Instruction Manual

Micro component audio system mp3-cd/cd-r/rw playback
Hide thumbs Also See for MM-ZB7:
Table of Contents

Advertisement

Searching for and Storing the Radio
Stations
GB
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1
Switch the system on by pressing Standy/On (
2
Select the required frequency band by pressing TUNER (Band)
again on the front panel or Band on the remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
LW
3
To search for a
station...
Manually
Automatically
PRESET function is explained in detail in the section
" Selecting a Stored Station " on.
4
Select the station to be stored by:
or
Pressing
or
frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the
The automatic search procedure may stop on a
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Program/Set.
Result: The PROGRAM is displayed for a few seconds.
b Press
or
to assign a program number between 1 and 15.
c Press Program/Set to store the radio station.
Result: PROGRAM is no longer displayed and the station is
stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
Standby/On
2
1
5
Program/
Set
4
14
Frequency Modulation
Medium Wave
Long Wave
Press Tuning Mode
or Tune/CD Mode
One or more times until MANUAL
is displayed.
One or more times until AUTO is
displayed.
buttons to increase or decrease the
or
TUNER
Tuning
5
4
Down
Mode
CD
3
4
TAPE
Volume
2
VOL.
Band
VOL.
3
5
4
5
Tune/CD
Tune/CD
Mode
Mode
VOL.

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing Standby/On (
2
Select the required frequency band by pressing TUNER(Band) on
the front panel.
3
) .
Select the radio station as follows.
To listen to ...
Stored station
Standby/On
Phones
buttons.

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
O
Up
5
Press ...
1. the Tuning Mode or Tune/CD Mode
button until "PRESET" is displayed.
2.
or
button to select the
required program.
TUNER
2
Tuning
Down
Mode
CD
1
3
TAPE
Volume
AUX
Rec/Pause
REV.Mode
Repeat
Band
VOL.
Program/
Set
Tune/CD
Mode
VOL.
Mono/ST
Mute
) .
O
Up
Sound
Mode

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents