Starting The Engine; Adjusting The Handle Height; Using The Self-Propel Drive - Toro Super Recycler 20797 Operator's Manual

Figure 11

Adjusting the Handle Height

You may raise or lower the handle to a position
comfortable for you.
Rotate the handle lock, move the handle to one of three
positions, and lock the handle into position (Figure 12).
Figure 12
1. Handle lock 2. Handle positions

Starting the Engine

1. Pull the blade control bar to the handle (Figure 13).
2. Turn the ignition key (Figure 14) or pull the recoil
start handle (Figure 15).
Note: When you pull the recoil start handle, pull it
lightly until you feel resistance, then pull it sharply
(Figure 15). Allow the rope to return to the handle
slowly.
Note: If the mower does not start after several
attempts, contact an Authorized Service Dealer.

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
8
Figure 13
Figure 14
Figure 15