Playing A Sequence Frame By Frame; Playing A Sequence At Variable Speeds; Strobe; Art - Samsung SV-5000W Owner's Instructions Manual

SV-5000W/SEA3 7/10/02 2:58 PM

Playing a Sequence Frame by Frame

GB
You can:
0
2, 3
REC P/STILL
STOP
1
DISPLAY

MONITOR

A.DUB
AUTO MENU
4

Playing a Sequence at Variable Speeds

You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example:
The Shuttle function is available on the remote control.
AUTO MENU
2
REVERSE
REVERSE
REVERSE
34
Page 34
stop the cassette at a given frame (image) ; and
advance one frame at a time.
No sound is heard when playing back frame by frame.
1 Press the PLAY ( ) button to start playing the cassette.
2
Press the P/Still button ( ) to stop the tape at a given frame.
3 Press the P/Still button ( ) again to advance forward frame by frame.
4 3
Instead of Step you can also turn the JOG to the left or right to
advance frame by frame backward or forward.
5
To return to normal playback, press the PLAY ( ) button.
If the Frame-by-Frame function is used for more than five
minutes (except for JOG function), the VCR will auto-
matically play to protect the cassette and video heads.
You wish to analyze an athlete's technique, movement
by movement.
No sound is heard when playing a sequence at variable
speeds.
1
Press the PLAY ( ) button to start playing the cassette.
2 Turn the SHUTTLE RING to the left or right to vary the playback
speed.
3 Each time you turn the shuttle ring, the speed will change as
shown in the following illustration.
(SP on All Systems)
REVERSE REVERSE
REVERSE REVERSE REVERSE SLOW SLOW PLAY
SLOW SLOW STILL PLAY
X9 X7 X3 PLAY (1/5) (1/10) X2
(1/5) (1/10)
(LP on PAL/SECAM/MESECAM/PAL-N)
REVERSE REVERSE
REVERSE REVERSE REVERSE SLOW SLOW PLAY
SLOW SLOW STILL PLAY
X15 X9 X5 PLAY (1/5) (1/10) X2
(1/5) (1/10)
(SLP on NTSC/PAL-M)
REVERSE REVERSE
REVERSE REVERSE REVERSE SLOW SLOW PLAY
SLOW SLOW STILL PLAY
X15 X9 X7 PLAY (1/5) (1/10) X2
(1/5) (1/10)
When you activate Variable Speed play, there will be no
color in some modes. This is normal operation. Modes
with no color are shown below.
No color modes : • Variable Speed play of LP recordings
on any system.
• X2 and Still/Slow play of SLP
recordings in PAL-M mode.
If the picture is noisy or distorted during X2 play or
other variable speed play, adjust the tracking manually
for a cleaner picture.

STROBE

You can see still images in succession.
1
Press the STROBE button during playback.
Result: "STROBE" is displayed on the screen.
A Discrete image is displayed on screen similar to
SLOW mode.
2
Press the +/- to vary the speed of STROBE mode.
3 To exit the STROBE mode, press the STROBE button.

ART

When in the ART mode, the picture contrast is changed to
resemble artwork.
1
Press the ART button during PLAY, SLOW or STROBE mode.
Result: The contrast of the image is changed.
2
Press the +/- buttons to vary the contrast of ART mode.
3 To exit the ART mode, press the ART button.
PLAY PLAY
X7 X9
MONITOR
PLAY PLAY
X9 X15
You can see the original input signal during a conversion recording.
PLAY PLAY
X9 X15
1
Press the MONITOR button during conversion.
Result: Original input signal is displayed on screen.
2
Press the MONITOR button again.
Result: The converted output signal is displayed on screen.
GB
STROBE AUDIO
2 3
ART INPUT
1
6
5
CH
9
8
CLR/RST
ART INPUT
5 6
CH
8 9
CLR/RST
0
2
STROBE AUDIO
2
3
ART INPUT
5 6
CH
1
8 9
CLR/RST
ART INPUT
6
5
CH
9
8
CLR/RST
0
2
REC P/STILL
STOP
DISPLAY MONITOR A.DUB
1
INPUT OUTPUT
SYSTEM SYSTEM
35