Presetting The Stations Automatically; Presetting The Stations Manually - Samsung SV-5000W Owner's Instructions Manual

SV-5000W/SEA2 7/10/02 2:53 PM

Presetting the Stations Automatically

GB
Your VCR contains a built-in tuner used to receive television
broadcasts. It can also receive cable television broadcasts.
You must preset the stations received through the tuner. This can
OK be done:
AUTO MENU
1
** INSTALLATION **
COUNTRY
ANT./CATV:ANTENNA
❿
AUTO SET UP
MANUAL SET UP
❿ END:(MENU)
# ❷
AMERICA
U.S.A.
PRESS (OK) TO CONTINUE
(MENU) TO EXIT
AUTO SET UP
PLEASE WAIT
CH 2
END:(MENU)
20
Page 20
automatically ; or
manually (see page 21).
1
Press the MENU button on the remote control.
Result: The programming menu is displayed and the cursor is
automatically placed in front of the AUTO SET UP option.
2 Press the button to select AUTO SET UP.
3
Press OK to start the Auto scanning.
Result: The AUTO indication flashes on the VCR display.
The number of channels automatically stored by the
VCR depends on the number of channels that have
been found (reception conditions, etc).
4 To exit AUTO TUNING, press the MENU button.
Once the Auto scanning procedure has finished, some channels
may have been stored more than once. Select the channels with
the best reception and delete the ones no longer required.
(see page 21.)

Presetting the Stations Manually

Your VCR contains a built-in tuner used to receive television
broadcasts. It can also receive cable television broadcasts.
You must preset the stations received through the tuner. This can
be done:
automatically (see page 20) ; or
manually.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding or buttons, until the cursor is placed
in front of the INSTALLATION option.
3
Press the button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding or buttons, until the cursor is placed
in front of the MANUAL SET UP option.
5
Press the corresponding or buttons, until the cursor is placed
in front of the CH ADD/DELETE option.
6
Press the or button to select channel that you want to
memorize or delete.
If you:
wish to store the press OK buttons to memorize current
displayed channel channel.
wish to delete the press CLR/RST button to delete current
channel displayed channel.
7
Press OK button to memorize.
Result: The selected channel is memorized.
8
Press CLR/RST button to delete.
Result: The selected channel is deleted.
GB
** M E N U **
TIMER PROGRAMMING
USER SET
❿
INSTALLATION
LANGUAGE SET
CLOCK SET
❿ END:(MENU)
# ❷
** INSTALLATION **
COUNTRY
ANT./CATV:ANTENNA
AUTO SET UP
❿
MANUAL SET UP
❿
END:(MENU)
# ❷
** MANUAL SET UP **
GUIDE CH SET UP
❿
CH ADD/DELETE
RF OUT M/G/I/K :M
RF OUT CH 14-69:60
116-125
❿
END:(MENU)
# ❷
** CH ADD/DELETE **
AMERICA
U.S.A.
❿ CH : 3(ADDED)
MFT : -
➛❿!!!!!!!!!
DELETE:CLR/RST
# ❷
END: (MENU)
21