10/17/02 2:21 PM
Do not damage the power cord. Damage to the power
cord may cause a fire or shock hazard.
When unplugging the power cord, please hold by the
plug and remove it carefully in standby mode.
When you finish operating the unit, always turn off the
power. Leaving a disc loaded for a long time with power
turned on may damage the disc.
When you insert the disc, please do not insert over
This product should not be used in business applications.
WHEN MOISTURE CONDENSATION GETS
IN THE UNIT
When the unit is moved from a cold area to a warm area
suddenly, moisture may condense on the mechanical parts
which restricts the laser signal from normal operation.
If this occurs, leave the unit with the power turned on for
1~2 hours. (without a disc)