10/17/02 2:21 PM
Press the SLOW button on the remote control
when the play function is on
-Voices do not come out when the
SLOW button is pressed
-Slow playing is 1/2 of the normal
playing speed at 1st press.
-Slow playing is 1/4 of the normal
playing speed at 2nd press.
-Slow playing is 1/8 of the normal playing speed at 3rd
-Slow playing is canceled at 4th press.
-The sound is muted during the slow playing.
To return to normal operation
-Press the SELECT(PLAY/PAUSE) button.
NTSC/PAL SELECTION METHOD
- Press the PAL/NTSC(REPEAT) button
for 1 sec or longer on STOP Mode.
You can matching the picture display
on your TV.
AI SLEEP FUNCTION
- Press AI SLEEP button, After playing state is finished,
Automatically go to power off.
SELECT SOUND TO YOUR PREFERENCE
1. Press the STANDBY/ON button.
(The audio is set to the stereo mode
2. Insert a disc and press the PLAY button.
Press the SOUND SELECTOR button
- Every time you press this button, sound changes as show
Screen on your
When playing a CD-R or CD-RW
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable)
can be played back only if they are already "finalized".
You can play back your original CD-Rs or CD-RWs recorded
in music CD format. (However, they may not be played back
depending on their characteristics or recording conditions.)
Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player's lens is dirty.
CD-RWs may require a longer readout time. (This is caused
by the fact that the reflectance of CD-RWs is lower than for