Table of Contents
Advertisement
MP3-CD Playback
1
Slide the Open button to
open the door, and insert
an MP3-CD.
• Push the door to close it.
2
Press the Play/Pause
(
) button.
• The inserted MP3-CD will be
Number
scanned for about 30~90
indicator
seconds. Playback will then
commence.
Your CD Player will take a
few moments to scan through
all the tracks recorded on a
MP3-CD.
3
To stop playback, press
the Stop (
) button.
• Press the Stop (
) button
again to switch off the unit.
Note
•
When the Open switch is slid to open the door, playback will stop.
13
Open
Track Number indicator
ESP indicator
Album
Playtime
indicator
Album Name indicator
Anti-S.T (Anti-Shock
Title (track title and
Time) Buffer Level
artist) display
indicator
Skip/Search function
Skip
Press and release the
or
during playback of a CD.
• Press the
button to play the next track.
Press the
button to go back to the beginning
of the current track. (Briefly press the
button
twice to repeat the previous track).
• Press the
button while the unit is in "Stop"
(no playback) mode. Track 2 will be played back.
Press the
button to play back the previous song.
Search
Press and hold the
or
button
during playback of a CD.
• Press and hold the
or
button.
The CD will playback in fast forward or fast reverse mode.
• Release the button to return to normal playback mode.
HOLD function
• Any other button pressed during CD playback will not function.
(On the display, the "Hold" indicator will flash.)
• Use the HOLD function when carrying your CD Player around with you.
Use of this function will allow you to conserve battery life as it prevents
the CD Player from being turned on unintentionally if a button is pressed.
• The remote control will still operate while the HOLD function on the main unit is active.
• The main unit will still operate while the HOLD function on the remote control is active.
button
Main Unit
Remote Control
Hold
14
Advertisement
Table of Contents
