Table of Contents
Advertisement
4.0 FIRMWARE UPDATES
It is possible to update the firmware for the A 4510B by downloading the latest update version from www.altronics.com.
au or redbackaudio.com.au if available.
To perform an update, follow these steps.
1) Download the Zip file from the website.
2) Remove the Micro SD card from the rear of the A 4510B and insert it into your PC.
3) Extract the contents of the Zip file to the root folder of the Micro SD card.
4) Rename the extracted .BIN file to update.BIN.
5) Remove the Micro SD card from the PC following windows safe card removal procedures.
6) With the power lead removed from the rear of the unit, insert the Micro SD card back into the A 4510B.
7) Reconnect power to the A 4510B and turn ON. The unit will check the Micro SD card and if an update is required the
A 4510B will perform the update automatically.
5.0 TROUBLE SHOOTING
5.1 SYMPTOMS AND REMEDIES
SYMPTOMS
SDCARD ERROR,Micro SD card NOT FOUND MESSAGE
DISPLAYED
WINDOWS SOFTWARE WILL NOT RUN
MP3 ERROR MESSAGE ON STARTUP
CONFIG OR GROUP FOLDER ERROR MESSAGE ON STARTUP
www.altronics.com.au
A 4510B Yearly Timer with Network Access
CHECK Micro SD card HAS BEEN INSERTED CORRECTLY
The Windows software for this product may not run on
all Windows based devices. The .NET framework on the
Windows device has to be updated to .NET Framework 4.
Available for download on the microsoft website.
Music Folders on the Micro SD card. (Note: The Bell folder
must have only one MP3 file, Refer to section 2.1).
The Micro SD card must have the relevant CONFIG and
GROUPS folders installed, and the configuration files must
be in these folders. These are created by the Calendar
Software Program. (Refer to section 2.1 and the "Software
REMEDIES
(see section 2.1 for more details)
Check that audio files exist in the Bell, Prebell and
Programming Guide").
Redback® Proudly Made In Australia 11
Advertisement
Table of Contents
