Table of Contents
Advertisement
Basic Connections
2
Power Connection
Connect your device to two, separate
then turn it on by pressing the
power button
6 6
Power Button
power
sources, connect it to your network, and
on the chassis module.
Terminal Emulation with Console
A
Cable
Console Port
To Connect to the CLI
1. Connect the device's
console port
to the management computer using the provided
console
cable.
2. Start a
terminal emulation program
on the management computer, select the
COM port, and use the following settings:
115200
Baud Rate:
Data bits:
8
Parity:
None
Stop bits:
1
Flow Control:
None
3. Press
Enter
on your keyboard to
connect to the
4. Login using username
"admin"
and no password. You can now proceed with
configuring your device.
Get started by typing
"help"
for a list of available commands.
Begin typing a command then press
Enter
For example
"hb"
will show all the available commands that contain the letter
combination "hb".
Serial Port
CLI.
for a list of available ways to complete.
7
Advertisement
Table of Contents
