Cleaning And Maintenance - BOMANN GSP 7406 Instruction Manual

Energy saving tips
 Always try to operate the dishwasher when it is
fully loaded.
 Do not rinse the dishes in advance under running
water.
 Use for each type of load the most appropriate
rinse program.
 Do not perform a pre-rinse (depending on model),
if not necessary.

Cleaning and Maintenance

WARNING:
 Always turn off the appliance and disconnect it
from the power supply before cleaning and user
maintenance.
 Allow the appliance to cool down enough before
cleaning.
 Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock! Hot steam could damage
the plastic parts. The appliance must be dry be-
fore restarting operation.
CAUTION:
 Do not use a wire brush or other sharp, abrasive
items.
 Do not use any acidic or abrasive detergents.
NOTE:
Dirty filters and clogged spray arms degrade the
rinsing. Regularly check the filter and spray arms and
clean them if necessary.
Filter system
The three-part filter system pre-
vents larger amounts of food or
other objects from getting inside
the pump.
1 Main filter: food and soil particles trapped in this
filter are pulverized by a special jet on the lower
spray arm and washed down to drain.
2 Coarse filter: filters out larger items such as pieces
of bone or glass shards that could block the drain-
age.
3 Micro filter: filters dirt and food residues in the
sump area and prevents it from being redeposited on
the dishware during rinse cycle.
Cleaning the filter system
CAUTION:
 The dishwasher must never be used without the
filter.
 Improper replacement of the filter can reduce
performance and damage the appliance.
 Do not knock out the filter for cleaning to avoid
possible deformations of the filters.
NOTE:
Check after each rinsing the filter for residues.
 Turn the coarse filter counterclockwise and re-
move the whole filter system upwards.
 Remove the coarse as well as the micro filter from
the main filter.
 Remove leftover food and clean the filter under
running water. Use a soft brush for the coarse and
micro filter, if necessary.
 Put the filter system properly in reverse order
together and reinstall in its provided position. Fix
the entire system, by tightening the filter unit
clockwise.
15