Problem
Possible cause / Action
Black or
Aluminum utensils have rubbed
grey marks
against dishware. Use a mild abra-
sive cleaner to eliminate those marks.
Stains on
Only use detergents without color-
inner sur-
ants.
face
White film
Hard water minerals: clean the interi-
on inside
or by using a damp sponge with
surface
dishwasher detergent. Wear rubber
gloves.
Unsatisfac-
∙ Improper loading ∙ dishes are re-
tory drying
moved too soon ∙ wrong program has
result
been selected ∙ use of cutlery with a
low-quality coating
Error codes
For some malfunctions, the display will show the
following error codes to warn you:
Control lamps
Meaning / Possible cause
flashes
Water inlet fault! Faucet not open,
inlet blocked or water pressure too
low.
Malfunction of heating element.
Overflow / water leakage!
ECO
Failure of communication between
main PCB with display PCB.
CAUTION:
If overflow occurs, turn off the main water supply
before calling an authorized technician.
If there is water in the lower housing part due to
an overfilling or a small leak, remove this water
before restarting the appliance.
NOTE:
If a problem persists after following the steps above,
please contact your distributor or an authorized tech-
nician.
Technical Data
Electrical connection / Water supply........................
Connection voltage: ..................220-240 V~ / 50 Hz
Rated power: .................................1760 – 2100 W
Rated current: .............................................10 A
Water pressure: ................................0.04 – 1 Mpa
Dimension H x W x D / Weight...............................
Unit size: ..............................84.5 x 59.8 x 61.0 cm
Net weight: ..........................................ca. 40.8 kg
Available accessory............................................
Inlet hose safety system: .............Art.-No. 8900 410
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
17