Maintenance; After Finishing A Recording - Samsung VP-D903 Owner's Instruction Book

Maintenance

After finishing a recording

✤ At the end of a recording you must remove the power source.
✤ Leaving the Lithium Ion Battery pack on the camcorder can reduce the life span of the battery.
1. Slide the TAPE EJECT switch in the direction of the arrow.
I
Opening the cassette door ejects the tape automatically.
I
Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free
environment.
I
Dust and other foreign materials can cause block-shaped noise or jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
I
Hold down the BATTERY RELEASE button and slide the battery pack
in the direction of the arrow.
ENGLISH
2
1
4
3
101 101