System Requirements; Recording With A Dv Connection Cable - Samsung SC-D530 Owner's Instruction Book
Samsung sc-d530: user guide
Hide thumbs
Also See for SC-D530:
- Owner's instruction manual (110 pages) ,
- Owner's instruction manual (109 pages) ,
- Service manual (111 pages)
Table of Contents
Advertisement
IEEE 1394 Data Transfer
System requirements
®
CPU : faster Intel
Pentium III™ 450Mhz compatible.
Operating system : Windows
®
98SE, ME, Mac OS
Main memory : more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card
Recording with a DV connection cable
1. Set the power switch to PLAYER mode.
2. Connect the DV cable (not supplied) from the DV IN/OUT port of
the camcorder to the DV IN/OUT port of the other DV device.
Make sure that DV appears on the screen.
3. Press the START/STOP button to begin REC PAUSE mode.
PAUSE is displayed on the OSD.
4. Start playback on the other DV device while you monitor the picture.
5. Press the START/STOP button to start recording.
If you want to pause recording momentarily, press the START/STOP button again.
6. To stop recording, press the
(STOP) button.
Note
When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
ENGLISH
79
79
Advertisement
Table of Contents
