Using The Lithium Ion Battery Pack; Charging The Lithium Ion Battery Pack - Samsung SC-D530 Owner's Instruction Book

ENGLISH
Preparation

Using the Lithium Ion Battery Pack

The amount of continuous recording time available depends on :
- The type and capacity of the battery pack you are using.
- How often the Zoom function is used.
It is recommended that you have several batteries available.

Charging the Lithium Ion Battery Pack

1. Attach the battery pack to the camcorder.
2. Connect the AC Power adapter to an AC cord and
connect the AC cord to a wall socket.
3. Connect the DC cable to the DC jack socket on the camcorder.
4. Turn the Camera power switch to off, and the charging indicator
will start to flash, showing that the battery is charging.
Blinking time
Once per second Less than 50%
Twice per second 50% ~ 75%
Three times per second 75% ~ 90%
Blinking stops and stays on 90 ~ 100%
On for a second and Error - Reset the battery pack and
off for a second the DC cable
5. When the battery is fully charged, disconnect the battery pack and the AC Power adapter from the camcorder.
Even with the power switched off, the battery will still discharge if it is left connected to the camcorder.
Notes
The battery pack may be charged a little at the time of purchase.
To prevent reduction in the life and capacity of the battery pack, always remove it from the camcorder after it is fully charged.
20 20
2
Charging rate
4
OFF
3
1