Date/Time - Samsung SC-D530 Owner's Instruction Book

ENGLISH
Advanced Recording

DATE/TIME

The DATE/TIME function works in CAMERA, PLAYER, M.REC and M.PLAY modes.
The date and time are automatically recorded on a special data area of the tape.
1. Press the MENU button.
The menu list will appear.
2. Move the MENU SELECTOR to highlight VIEWER and push the MENU SELECTOR.
3. Move the MENU SELECTOR to highlight DATE/TIME.
4. Push the MENU SELECTOR to select the sub-menu.
5. Using the MENU SELECTOR, select the DATE/TIME mode.
You can choose between the OFF, DATE, TIME, and DATE&TIME modes.
OFF
DATE only
TIME only
DATE & TIME
To return to the previous menu, highlight DATE/TIME in the middle of the menu and
push MENU SELECTOR.
6. To exit, press the MENU button.
Notes
The DATE/TIME is not affected by the OSD ON/OFF (DISPLAY) menu.
The DATE/TIME will read "- - -" in the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera's memory.
- When the lithium battery becomes weak or dead. (see page 10)
Before you can use the DATE/TIME function, you must set the Clock. See CLOCK SET on page 36.
56 56
CAM MODE
INITIAL
CAMERA
A/V
MEMORY
VIEWER LCD ADJUST
DATE / TIME
DISPLAY
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
DISPLAY
CAM MODE
VIEWER SET
DATE / TIME
DATE
TIME
DATE&TIME