Product Checking; Installation - Mitsubishi FR-HAL-0.4K Instruction Manual

Product Checking

1
Product Checking
(1) Unpack the option unit, and ensure that the product received is as you
ordered and it is intact.
(2) Make sure that the package includes all accessories.
AC reactor
(FR- HAL)...................... 1
*The terminal cover for the 200V class 15K or less is provided on the terminal block.
2

Installation

(1) Install according to the environment conditions on page 5.
(2) Fully take caution not to make the ambient temperature higher than the
permissible value (-10°C to +50°C). In addition, as the reactor itself
generates heat, leave sufficient clearances around it. (Independently of
the installation direction of the reactor 10 cm or more for the above and
below, 5 cm or more for the right and left)
5cm or more
2
MITSUBISHI
MODEL
FR-HAL- K XXXXXXXXXXXX
SERIAL
MITSUBISHI ELECTRIC CORP.
FR-HAL- H
Terminal block cover .......1
(15K or less for the 200V
class, 55K or less for the
400V class) *
10cm or more
AC REACTOR
K
Applied motor capacity (kW)
Symbol Applied Power Supply Voltage
200V class
None
H 400V class
Instruction manual ..........1
5cm or more
5cm or more
5cm or more