Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION METHOD
Bracket & Camera Mounting
- Install the Mounting Bracket at the desired location.
Connecting to Monitor and Power
- Set the impedance switch to the 75 standard position unless other equipment is looped
out of the monitor.
- Adaptor: AC24V / 800mA or DC12V / 1A (AC24V / DC12V Model)
• Be sure to connect power after all the installation is done.
• Do not use power sources other than that specified.
Sun-Shield Mounting
- After adjusting view angle, cap over the camera with the sun-shield and fix it to the camera
with the sun-shield bolt.
04_
function & installation
Advertisement
Table of Contents
