D-Link DAP-1155 User Manual page 161

DAP-1155 Wireless N 150 Access Point & Router
User Manual
When the WPA-PSK or WPA2-PSK value is selected, the WPA Encryption settings section is
displayed:
Figure 127. The WPA2-PSK value is selected from the Network Authentication drop-down list.
Parameter
Encryption Key PSK
WPA2 Pre-
authentication
WPA Encryption
WPA renewal
When you have configured the parameters, click the Change button.
A key for WPA encryption. The key can contain digits and/or Latin
characters.
The checkbox activating preliminary authentication (displayed only
for the WPA2-PSK authentication type).
An encryption method: TKIP, AES, or TKIP+AES.
The time period (in seconds), at the end of which a new key for WPA
encryption is generated. When the value 0 is specified for this field,
the key is not renewed.
Page 161 of 215
Configuring Device (Router Mode)
Description