D-Link DAP-1155 User Manual page 125

DAP-1155 Wireless N 150 Access Point & Router
User Manual
When the WPA-PSK or WPA2-PSK value is selected, the WPA Encryption settings section is
displayed:
Figure 97. The WPA2-PSK value is selected from the Network Authentication drop-down list.
Parameter
Encryption Key PSK
WPA2 Pre-
authentication
WPA Encryption
WPA renewal
Click the Next button to continue.
When all the steps of configuring the WLAN are completed, the specified settings are displayed on
the page. Check their correctness and then click the Save button. After that you get to the quick
settings page.
A key for WPA encryption. The key can contain digits and/or Latin
characters.
The checkbox activating preliminary authentication (displayed only
for the WPA2-PSK authentication type).
An encryption method: TKIP, AES, or TKIP+AES.
The time period (in seconds), at the end of which a new key for WPA
encryption is generated. When the value 0 is specified for this field,
the key is not renewed.
Page 125 of 215
Configuring Device (Router Mode)
Description