D-Link DAP-1155 User Manual page 143

Wireless n 150 access point & router
Hide thumbs Also See for DAP-1155:
Table of Contents

Advertisement

DAP-1155 Wireless N 150 Access Point & Router
User Manual
Parameter
MAC
Figure 112. The page for creating a new connection. The IP and Miscellaneous sections.
Parameter
IP Address
Netmask
Gateway IP address
Primary DNS server/
Secondary DNS server
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC Address button (
MAC address of the network interface card (of the computer that is
being used to configure the access point at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the access
point's LAN at the moment. To do this, select the relevant value
from the drop-down list (the field will be filled in automatically).
IP
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Page 143 of 215
Configuring Device (Router Mode)
Description
Description
) to set the

Advertisement

Table of Contents
loading

Table of Contents