D-Link DAP-1155 User Manual page 112

DAP-1155 Wireless N 150 Access Point & Router
User Manual
Figure 85. Configuring PPTP + Dynamic IP WAN connection. The expert settings mode. The Ethernet
Parameter
MTU
MAC
section.
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC Address button (
MAC address of the network interface card (of the computer that is
being used to configure the access point at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the access
point's LAN at the moment. To do this, select the relevant value
from the drop-down list (the field will be filled in automatically).
Page 112 of 215
Configuring Device (Router Mode)
Description
) to set the