D-Link DAP-1155 User Manual page 105

DAP-1155 Wireless N 150 Access Point & Router
User Manual
Figure 79. Configuring PPTP + Static IP WAN connection. The expert settings mode. The IP and
Parameter
IP Address
Netmask
Gateway IP address
Primary DNS server/
Secondary DNS server
Enable RIP
Enable IGMP Multicast
NAT
Firewall
Miscellaneous sections.
IP
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Page 105 of 215
Configuring Device (Router Mode)
Description