Check Card Detection on the Embedded Web Page
7
Check Card Detection on the Embedded Web Page
The Flexy extension cards require no software configuration. They are automatically detected by
the base unit when the device boots.
7.1
Connecting to the Embedded Web Server
Configure the network parameters to set the computer being used to reach the web interface on
the same IP range than the LAN of the Ewon device.
Once both devices are in the same IP range, connect the PC to one of the LAN port of the Ewon
device.
Open an Internet browser and access the homepage of the Ewon device by typing the LAN IP
address in the URL field (the default address is http://10.0.0.53).
A dialog box will pop-up asking for credentials. Default ones are:
•
login: adm
•
password: adm
7.2
Detected Cards Displayed in the System Page
Once connected to the embedded web pages of the Ewon device, the homepage displays the
system status including detected extension cards.
To access in details the system status summary, click on Diagnostic > Status > System Info >
System.
7.3
Modem Information Displayed in the Information Page
Extended information about the modem - including manufacturer, type and modem firmware
version - is available in the Info page. The path to the Info page is: Diagnostic > Status > System
Info > Info .
FLB 3209 - 4G (APAC) Extension Card Installation Guide
For security reasons, changing the default password adm is an absolute requirement. To
change it, from the menu bar, click on Setup > Users and double click on the adm entry to
edit and save its password.
17 (18)
IG-0032-00 1.0 en-US