Table of Contents
Advertisement
Plug the FLB 3209 into the Base Unit
5.2
SIM Card Insertion
A SIM card obtained from a wireless phone provider is necessary to communicate through the
FLB 3209.
It must be inserted before inserting the extension card in the base unit as there is no external
access to the SIM card holder.
The SIM card holder is located on the components side of the extension card. Carefully slide the
SIM card in the holder as shown in the picture below. Make sure the card is fully inserted against
its arrest, otherwise it could damage both the drawer and the SIM card when the extension card
will be inserted in the base unit. Note the position of the cutoff (1) of the SIM card.
Fig. 6
SIM location on the FLB 3209
FLB 3209 - 4G (APAC) Extension Card Installation Guide
12 (18)
IG-0032-00 1.0 en-US
Advertisement
Table of Contents
