Roll Bar And Safety Belt; Before Starting - Husqvarna PZ29D CE Operator's Manual

Roll Bar and Safety Belt

Operate the unit with the roll bar in the raised and
locked position and use the seat belt. There is no
rollover protection when the roll bar is down. If it is
necessary to lower roll bar, do not wear the seat belt.
Raise the roll bar as soon as clearance permits.
WARNING!
The seat belt must be used when the
roll bar is in upright position.

Before Starting

1. Read the sections Safety Instructions and
Controls before starting the machine.
2. Perform the daily maintenance. (see Maintenance
Schedule in the Maintenance section).
3. Make sure there is sufficient fuel in the fuel tank.
4. Make sure that the parking brake is engaged.
5. Adjust the seat to the desired position.
6. Place the steering controls in the locked (outer)
neutral position.
28
OPERATION
Roll bar in upright position
Activate parking brake before starting
Place controls in neutral position
8011-464
8065-006
8065-108