Roll Bar And Safety Belt; Before Starting - Husqvarna 966553901 Operator's Manual

Roll Bar and Safety Belt

Operate the unit with the roll bar in the raised and
locked position and use the seat belt. There is no
rollover protection when the roll bar is down. If it is
necessary to lower roll bar, do not wear the seat belt.
Raise the roll bar as soon as clearance permits.
WARNING!
The seat belt must be used when the roll
bar is in upright position.

Before Starting

1. Read the sections on Safety and Controls before
starting the machine.
2. Perform the daily maintenance before starting
(see Maintenance Schedule in the Maintenance
section).
3. Check that there is sufficient fuel in the fuel tank.
4. Make sure that the parking brake is engaged.
5. Adjust the seat to the desired position.
6. Place the steering controls in the neutral position.
OPERATION
Roll bar in upright position
Activate parking brake before starting
Place controls in neutral position
8065-011
8065-006
8065-018
27