Table of Contents
Advertisement
Drive Lever Adjustment
Drive levers can be adjusted up and down and side to
side to suit the operator.
Height Adjustment
Alignment adjustments will be needed after adjusting
the height. Make adjustments with the unit turned off.
1. Remove the bolts securing the drive levers to the
control assembly.
2. Position the drive lever at the desired height and
reinstall the bolts, but do not fully tighten the bolts
at this time.
Alignment
To align the drive levers uniformly, rotate both drive
levers inward and press both levers all of the way
forward.
1. Rotate the drive levers in the upper slots of the
lever until the levers are aligned with each other.
Tighten bolts on each drive lever securely.
MAINTENANCE
1
1. Drive levers
2. Control assembly
3. Alignment slot
Neutral adjustment
1
3
2
8065-049
43
Advertisement
Table of Contents
