Advertisement
Using Belt Positioning Clip
1. Make Sure Vehicle's Seat Shoulder Belt Lays in
the Red Zone As Shown
If the vehicle's seat shoulder belt lays outside this zone,
you MUST use the belt positioning clip. DO NOT use the
belt positioning clip if the shoulder belt is in the red zone.
2. Attach Belt Positioning Clip
If using the shoulder belt
positioning clip, it MUST be
attached to the slot on the
bottom of the base. Insert the
loop end of strap through the
slot on bottom of seat exactly where shown.
3. Push Clip and Strap Through Loop
Pass the clip and the strap through the loop end as shown
and pull strap up.
35
Advertisement
