Eaton L-852G Instruction Manual
  1. Manuals
  2. Brands
  3. Eaton Manuals
  4. Lighting Equipment
  5. L-852G
  6. Instruction manual

Eaton L-852G Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DOCUMENT
REVISION
June 7, 2021
Cooper Lighting Solutions
Airport Lighting Products
1200 Kennedy Road
Windsor, CT 06095
1331
C
Instruction Manual
For Parts or Technical Service Call (860) 683-4300
Pro APF Series LED
Inset Runway Guard Light
FAA Type L-852G
OR
Stop Bar Light
FAA Type L-852S
8-inch aluminum optical housing with
ductile iron support ring
Copyright © 2021 Cooper Lighting Solutions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L-852G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Eaton L-852G

Summary of Contents for Eaton L-852G

  • Page 1 1331 REVISION June 7, 2021 Instruction Manual Pro APF Series LED Inset Runway Guard Light FAA Type L-852G Stop Bar Light FAA Type L-852S 8-inch aluminum optical housing with ductile iron support ring Copyright © 2021 Cooper Lighting Solutions Cooper Lighting Solutions...

  • Page 2: Table Of Contents

    DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Table of Contents Table of Contents ........................1 Revisions ..........................2 Product Warranty ........................3 Warning Labels ........................4 Safety Notices ......................... 5 Keep Away From Live Circuits ..................5 Resuscitation ........................

  • Page 3: Revisions

    DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Revisions Issue/Reissue Revision Description Checked Approved Letter Number A220-151 Initial Issue with ECN 10/12/20 Pg.7: Updated P/N Explanation for addition of -4 option of logitrac monitoring (852GAP1);...

  • Page 4: Product Warranty

    DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Product Warranty Warranty Refer to Cooper Crouse-Hinds Airport Lighting Products Terms and Conditions for product specific warranty information. (f) EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, SELLER...

  • Page 5: Warning Labels

    DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Warning Labels DANGER: DANGER The hazard or unsafe practice will result in severe injury or death. WARNING: WARNING The hazard or unsafe practice could result in severe injury or death.

  • Page 6: Safety Notices

    REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Safety Notices This equipment is normally used or connected to circuits that may employ voltages that are dangerous and may be fatal if accidentally contacted by operating or maintenance personnel.
  • Page 7 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G waveforms. All meter manufacturers offer TRUE RMS measuring meters. The following is a short list of TRUE RMS Multimeters from Fluke: Manufacturer Model Number Fluke Our recommended multimeter is the Fluke 287 with the Fluke I800 current clamp accessory.
  • Page 8 Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G A grounded ESD Wrist Strap when working on or handling fixture power supplies or LED/Heat sink assemblies. ESD Wrist Straps, also known as anti-static Wrist Straps, are used to prevent electrostatic discharge (ESD) by safely grounding a person working with electronic equipment or at an electronic assembly facility.

  • Page 9: Part Number Explanation

    The Cooper Lighting Solutions Inset Runway Guard Light (IRGL) is a Style 3, ITS verified FAA L-852G and Inset Stop Bar light is a Style 3, FAA L-852S per FAA AC 150/5345-46 and EB67 (latest versions). It is designed for installation at the intersection of runways and taxiways or any other location where visual guidance of moving aircraft or ground vehicles is desirable.

  • Page 10: Installation

    Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G strength shear pins. The aluminum housing has a die cast bottom housing that is attached using 4 screws. A polyurethane O-ring is used to provide a watertight seal between the inner cover and the optical housing.

  • Page 11: Installation Bolt Torque

    Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G either an alternating flashing bar of lights (i.e. YO---YF---YO---YF---YO---YF---… etc.), in which the YOs flash on while the YFs flash off in an alternating fashion, or a solid bar of lights that flash in unison (i.e.

  • Page 12: Heico-Lock Installation Guidlines

    3/8” hardware, however other components within the light fixture installation (i.e. base-can, extension rings, spacer rings, etc.) may not be capable of supporting such a load. Eaton Crouse-Hinds recommends following the installation bolt torque values and methodology outlined in Section 9.1.

  • Page 13: Cleanliness And Workmanship

    DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G NOTICE: The warranty is void if other than Crouse-Hinds Airport Lighting Products NOTICE parts are used to re-lamp or rebuild the light unit. WARNING: The warranty is void if the screws holding the L852G optical housing to the WARNING inner cover are loosened or removed.

  • Page 14: Cleaning The Lenses

    Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G 10.2.3 Snowplow operators should exercise extra care not to strike the light units with snowplow blades. Use rubber blades for added protection to the unit. After snow removal operations, inspect all light units to locate and replace, if necessary, any damaged light assemblies.

  • Page 15: Replacing The Led Modeule

    DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G 10.4 Replacing the LED Module WARNING: The Warranty is void if the screws holding the L852G optical housing to the WARNING inner cover are loosened or removed.

  • Page 16: Lens Replacement

    Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G First, remove and secure power to the light unit. Separate the Optical Assembly from the outer ring by removing the two bolts. There are two pry slots in the optical housing to help separate the optical assembly from the support ring.

  • Page 17: Power Lead/Feedthru Replacement

    REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G the light unit lead from the isolation transformer. Clean the mounting flange area of the light base. Secure the light to the base per Section 9.1. 10.7...

  • Page 18: Power Supply Troubleshooting And Replacement

    Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G in-lbs. Connect the ends of the LED cables to the new expansion board. Inspect the feed-thru terminal for signs of corrosion. Replace feed-thru assembly per Section 10.7 if corrosion is found. Inspect/replace the optical housing’s O-ring gasket per Section 10.5.
  • Page 19 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Figure 2: Power Supply Connections *See Figures 7, 8 and 9 Jumpers shown in Figure 1 are for example only. IMPORTANT: The jumpers must be placed in the correct position(s) for proper operation of the appropriate fixture.

  • Page 20: Electrical Inspection

    DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G 10.9.2 Electrical Inspection WARNING: Contact Crouse-Hinds Airport Lighting for assistance prior to operating a failed fixture. There may be dangerous voltage present on the input AC WARNING pins of the power supply.

  • Page 21: Power Supply Replacement

    DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Fault conditions include: • Disconnected or ‘Open’ LED module o Replace cable if damaged or ‘open’. • Incorrect jumper setting or missing jumpers o See Figures 7, 8 and 9 for proper jumper setting.

  • Page 22: Resetting A Irgl Power Supply's E-Prom

    Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Turn the optical assembly upside down and remove the four screws holding the inner cover to the light housing. Disconnect the power supply leads from the feed-through terminals and LED module.

  • Page 23: Pressure Test

    Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G With power off, add a jumper, 10047-1677 to power supply J200 between positions 1 and 2. Attach the LED type to be used with the power supply, installing the correct jumpers to J203 if required per Figures 7, 8 and 9.

  • Page 24: Spare/Replacement Parts List

    DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Spare/Replacement Parts List Item Part Number Description LED Module Replacements 21797 Yellow LED PCB 21794 Red LED PCB Prism/Lens Replacements 21676-TY Prism (Yellow Color) 21619-4...
  • Page 25 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Length Length (IN) (IN) 21716-07 0.88 21716-22 2.75 21716-08 1.00 21716-24 3.00 21716-09 1.13 21716-26 3.25 21716-10 1.25 21716-28 3.50 21716-11 1.38 21716-32 4.00 21716-12 1.50...

  • Page 26: Tables And Figures

    DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Tables and Figures Figure 4A: Part Layout P1 Option...
  • Page 27 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Figure 4B: Installation View of Inner Cover P2 option...
  • Page 28 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Figure 5: 19999 Installation (Lifting) Tool TCL Fixture Shown...
  • Page 29 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Figure 6: WIRING DIAGRAM FIGURE 7: PART NUMBER 852SAP1-RN-NF-XX-X STOP BAR POWER SUPPLY J203 JUMPER CONFIGURATION FIGURE 8: FIRST ON (YO) POWER SUPPLY J203 JUMPER POSITION...
  • Page 30 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G FIGURE 9: FIRST OFF (YF) POWER SUPPLY J203 JUMPER POSITION PART NUMBER 852GAP1-YN-YF-XX-X FAA RECOGNIZED/ETL CERTIFIED FIXTURE TYPE POWER USED SUPPLY J203 FIXTURE RECOMMENDED LIGHT DIRECTION & COLOR...
  • Page 31 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Figure 10: WIRING DIAGRAM Figure 11: WIRING DIAGRAM...
  • Page 32 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G Figure 12: WIRING DIAGRAM Figure 13: WIRING DIAGRAM...

  • Page 33: Appendix A: Bluetooth Instruction

    Inset Runway Guard Light L-852G Appendix A: Bluetooth Instruction Contact Eaton Crouse-Hinds Airport Lighting on Bluetooth App information. The Fixture Configuration Application is an Android based application that can be used to configure light fixtures as well as to gather diagnostic information about the fixtures. Section 13.1 provides user instructions for running the app.
  • Page 34 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G 13.1.2 Features The Configuration App has two features; Diagnostics and Configuration. The Diagnostics feature can be used to gather data about the fixture, while the configuration feature can be used to configure the fixture.
  • Page 35 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G 13.1.3.1 First ON/First OFF Whether the fixture starts blinking as first on or first off can be changed by clicking ‘SET FIRST ON’ or ‘SET FIRST OFF’ button. The change will take effect the next time the light fixture is turned on.
  • Page 36 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G 13.1.3.3 Change Ramp Time The ramp time of the fixture can be changed by clicking ‘DECREASE RAMP’ or ‘INCREASE RAMP’. 13.1.3.4 Toggle Blinking Blinking can be toggled by clicking the ‘TOGGLE BLINKING’ button. Clicking it once will make the...
  • Page 37 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G 13.1.4 Diagnostics Feature In order to run the Diagnostics feature tap on ‘Diagnostics. 13.1.4.1 Operating Data The following data is displayed under Operating Data. •...
  • Page 38 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G 13.1.4.3 Operating Hours The following data is displayed under Operating Hours. • Total Hours • B1 Hours • B2 Hours • B3 Hours • B10 Hours •...
  • Page 39 DOCUMENT 1331 REV. C Instruction Manual PRO APF Series LED Inset Runway Guard Light L-852G 13.1.5 Help The help screen displays helpful information about the Configuration App.

This manual is also suitable for:

Pro apf seriesCrouse-hinds seriesL-852s

Table of Contents