Table of Contents
Advertisement
Quick Links
Model #
HDFP48-53E
OMSID # 320084755
#
HDFP48-53AE
# 320084799
ASSEMBLY INSTRUCTIONS
Stanwich 48" Coil Media Electric Fireplace
Questions, problems, missing parts?
Before returning to the store, call Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
THANK YOU
We appreciate the trust and confidence you have placed in StyleWell through the purchase of this electric fireplace/heater. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing StyleWell!
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for StyleWell Stanwich
Summary of Contents for StyleWell Stanwich
- Page 1 THANK YOU We appreciate the trust and confidence you have placed in StyleWell through the purchase of this electric fireplace/heater. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
-
Page 2: Table Of Contents
Table of Contents Table of Contents............2 Hardware Included ..............3 Safety Information ............2 Package Contents ..............4 Maximum Recommended Weight Loads .........2 Assembly ..............5 Warranty ..............2 Care and Maintenance..........24 Pre-Assembly .............. 2 Caring for Wood Furniture ............24 Planning Assembly ..............2 Cleaning the Fireplace Trim ...........24 Tools required ................2... -
Page 3: Hardware Included
Pre-Assembly (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part Description Quantity Part Description Quantity Insert screw 10+1 extra Shelf support 8+1 extra Wood dowel 53+2 extra Rubber bumper 4+1 extra Cam lock 50+2 extra Large L-shaped bracket Cam bolt 50+2 extra Pan head screw... -
Page 4: Package Contents
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Part Description Quantity Heater Right skirting Left upright arm Upper front molding Right upright arm Upper side panel Connector strap Upper partition molding Ember bed Upper partition panel Left log Lower side panel Right log Left lower partition panel Firebox wall panel... -
Page 5: Assembly
Assembly Preparing media shelf and base assembly NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. □ Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratches. - Page 6 Assembly (continued) Attaching middle crossbar NOTE: Refer to the cam lock assembling guide drawings in this step for further clarification on how to properly install cam locks. Apply this method whenever instructed to install cam locks □ Attach the middle crossbar (A1) to the media shelf (L) by engaging three cam locks (CC). Attaching rear skirting □...
- Page 7 Assembly (continued) Attaching front skirting □ Align and attach front skirting (O) to both side skirtings (P and Q) using two cam locks (CC). Installing base □ Using the wood dowels (BB) as a guide, align and attach the previous assembly to the bottom panel (M) by engaging eleven cam locks (CC).
- Page 8 Assembly (continued) Preparing bottom panel assembly □ Securely screw four cam bolts (DD) into the designated small holes on the top of bottom panel (M) using a Phillips screwdriver. Attaching middle trims □ Glue two wood dowels (BB) into the inner holes on each middle trim (C1). □...
- Page 9 Assembly (continued) Gluing wood dowels □ Glue the wood dowels (BB) into the inner holes on both lower side panels (V) and the lower partition panels (W and X) as shown. Attaching side panels □ Align and attach both lower side panels (V) to the bottom panel (M) by engaging four cam locks (CC). HOMEDEPOT.COM Please contact 1-877-527-0313 for further assistance.
- Page 10 Assembly (continued) Attaching lower partition panels □ Using the wood dowels as a guide, firmly press the assembled lower partition panels (W and X) to the bottom panel (M) and fasten them in place with four long flat head screws (GG). Attaching media shelf □...
- Page 11 Assembly (continued) Preparing upper side panels and partition assembly □ Ask for assistance to lift the previous assembly upright, securely screw the cam bolts (DD) into the designated small holes on the media shelf (L) using a Phillips screwdriver. Preparing top panel and upper moldings assembly □...
- Page 12 Assembly (continued) Gluing wood dowels □ Glue the wood dowels (BB) into the inner holes on the upper front moldings (R), upper side panels (S), upper partition panel (U) and top reinforcement (Z) as shown. Combining upper panels with moldings □...
- Page 13 Assembly (continued) Attaching top reinforcement □ Align and attach the top reinforcement (Z) to the top panel (K) by engaging two cam locks (CC) as shown. Attaching upper side panels and upper partition panel □ Align and attach the assembled side panels (S) and upper partition panel (U) to the top panel (K) by engaging two cam locks (CC) in each panel.
- Page 14 Assembly (continued) Fastening top reinforcement □ Using the pilot holes as a guide, attach two mending plates (II) at the joints where the top reinforcement (Z) meets the upper front moldings (R) with two short flat head screws (EE) per plate. □...
- Page 15 Assembly (continued) Installing back panels □ Now, go back and securely tighten all the cam locks and screws. Make sure all the parts are tight and there are no gaps between the parts. This will help keep the unit square. □...
- Page 16 Assembly (continued) Attaching door panels □ Ask for assistance to lift the assembly unit upright and position it near the final location. □ Pick up one door (Y) and fasten the hinge bases onto the left side panel (V), using the pilot holes as a guide. □...
- Page 17 Assembly (continued) Attaching paper stickers and the rubber bumpers □ Put the paper stickers (RR) onto the visible cam locks and screws. □ Stick the rubber bumpers (NN) on the outer corners of doors where the lower partition panels (W and X) are in contact with. Attaching upright arms NOTE: .
- Page 18 Assembly (continued) Attaching logs to ember bed IMPORTANT: Carefully follow the 2 steps below for inserting each log. 1. Install left log (F) into left hole of ember bed (E) by inserting front edge of the log base into front notches of ember bed hole.
- Page 19 Assembly (continued) Attaching wall panel □ Fold the wall panel (H) as shown. Then position yourself at back side of heater (A). □ Hold wall panel (H) at the angle shown below and insert lower back edge into metal slots on back of heater (A). □...
- Page 20 Assembly (continued) Inserting the glass □ Slide the glass (I) into the inner U-channels on both upright arms (B and C) until the glass sits onto the heater (A). If needed, push top of upright arms in or out to accommodate glass. Make sure the top of the glass (I) is flush with the top of both upright arms (B and C).
- Page 21 Assembly (continued) Attaching connector strap □ Fasten connector strap (D) to both upright arms (B and C) using two screws (AA) as show below. Holes must be in line for screw to pass through. Finishing fireplace insert assembly □ The firebox is now ready for the next assemble step. HOMEDEPOT.COM Please contact 1-877-527-0313 for further assistance.
- Page 22 Assembly (continued) Installing fireplace insert □ Lift the fireplace insert carefully into the back of the assembled mantel and center it on the bottom panel in the opening. □ Use the pilot holes as a guide, fasten two large L-shaped brackets (OO) onto the firebox support (E1) with four pan head screws (PP).
- Page 23 Assembly (continued) Installing the tipping restraint hardware WARNING: Young children can be seriously injured by tipping furniture. You must install the tipping restraint hardware with the unit to prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a substitute for proper adult supervision.
-
Page 24: Care And Maintenance
Care and Maintenance A touch-up pen has been provided to minimize the small nicks or scratches that may occur during assembly or shipping. To clean and care for your furniture: □ Use a soft, clean cloth that will not scratch the surface when dusting. □... - Page 25 Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Need help?
Do you have a question about the Stanwich and is the answer not in the manual?
Questions and answers